|
Manual Pipe Clamps, double
|
Choice of two differents alignment screws
- Cylinder, plain
- Ball-point
|
|
Double chain clamp type 2500 D is an easy tool for clamping pipe to pipe, pipe to bend, pipe to tee or pipe to flange. The low weight make it very easy to operate in the workshop and on site.
These clamps can adjust and align pipes with wall-thickness up to œ" (12 mm), and has a clamping force at 2500 kg.
The clamps can be used for serval pipe dimensions, simply by removing or taking off the jack-bars. The jack-bars are made of stainless steel on all our clamps.
Type 2500D can be used for stainless steel, as only stainless steel is in contact with the pipe.
All clamps ca be used for pipe dimensions from 5".
|
Type 2500D (Double) |
|
|
For stainless steel |
For carbon steel |
|
Range |
Cat. No. |
No. jackbars |
Weight |
Cat. No. |
No. jackbars |
Cat. No. |
|
|
|
|
(kg/lb) |
|
|
(kg/lb) |
|
5 - 12 |
2500DS512 |
4 |
11,0 |
22,0 |
2500DM512 |
4 |
11,0 |
22,0 |
|
5 - 16 |
2500DS516 |
5 |
12,6 |
25,2 |
2500DM516 |
4 |
11,8 |
23,6 |
|
5 - 20 |
2500DS520 |
6 |
14,2 |
28,4 |
2500DM520 |
5 |
13,4 |
26,8 |
|
5 - 24 |
2500DS524 |
7 |
15,4 |
30,8 |
2500DM524 |
6 |
14,6 |
29,2 |
|
5 - 32 |
2500DS532 |
10 |
19,4 |
38,8 |
2500DM532 |
8 |
17,8 |
35,6 |
|
5 - 36 |
2500DS536 |
11 |
20,5 |
41,0 |
2500DM536 |
9 |
18,9 |
37,8 |
|
5 - 42 |
2500DS542 |
13 |
22,7 |
45,4 |
2500DM542 |
11 |
21,2 |
42,4 |
|
5 - 48 |
2500DS548 |
14 |
24,1 |
48,2 |
2500DM548 |
13 |
23,3 |
46,6 |
|
5 - 54 |
2500DS554 |
15 |
25,2 |
50,4 |
2500DM554 |
14 |
24,4 |
48,8 |
|
5 - 60 |
2500DS560 |
16 |
27,0 |
54,0 |
2500DM560 |
15 |
26,2 |
52,4 |
|
|
