Manual Pipe Clamps, single

Choice of two differents alignment screws - Cylinder, plain - Ball-point

Single Chain Clamp type 2500S and Double Chain Clamp type 2500D are easy tools for clamping pipe to pipe, pipe to bend, pipe to tee or pipe to flange. The low weight make it very easy to operate in the workshop and on site.
The Chain Clamps can adjust and align pipes with wall-thickness up to 1/2" (12 mm), and has a clamping force at 2500 kg.

These Clamps can be used for several pipe dimensions, simply by removing or taking off the jack-bars. The jack-bars are made of stainless steel on all our Chain Clamps.
Type 2500S and 2500D can be used for stainless steel, as only stainless steel is in contact with the pipe.

All Chain Clamps can be used for pipe dimensions from 5".

Type 2500S (Single)
	For stainless steel				For carbon steel
Range	Cat. No.	No. jackbars	Weight		Cat. No.	No. jackbars	Weight
			(kg/lb)				(kg/lb)
5 - 12”	2500SS512	4	6,3	12,6	2500SM512	4	6,3	12,6
5 - 16”	2500SS516	5	7,3	14,6	2500SM516	4	6,7	13,4
5 - 20”	2500SS520	6	8,3	16,6	2500SM520	5	7,7	15,4
5 - 24”	2500SS524	7	9,1	18,2	2500SM524	6	8,5	17,0
5 - 32”	2500SS532	10	11,7	23,4	2500SM532	8	10,5	21,0
5 - 36”	2500SS536	11	12,8	25,6	2500SM536	9	11,5	23,0
5 - 42”	2500SS542	13	14,2	28,4	2500SM542	11	13,2	26,4
5 - 48”	2500SS548	14	16,1	32,2	2500SM548	13	15,4	30,8
5 - 54”	2500SS554	15	17,8	35,6	2500SM554	14	17,1	34,2
5 - 60”	2500SS560	16	19,5	39,0	2500SM560	15	18,8	37,6