|
Double Pneumatic Cylinder Internal Clamping Device for Pipes and Formed Parts
 |
Clamping device with double cylinder and bend jaw |
-
No tacking
-
Optimal setup of the pipe parts via separate clamping (double cylinder)
-
Gap-free abutment of the pipe parts to be welded together
-
Automatic centring of the pipe formed parts
-
Minimizes ovality tolerances
-
No subsequent handling of the workpieces (root free of tempering discoloration)
-
Greatly reduced consumption of forming gas (small forming gas chamber/no gas pre-flow time)
-
Can be used flexibly as a mobile building site tool or in pipe manufacture
-
Clamping range of 25 – 200 mm internal diameter
Purge Clamp til Flanger
(Suitcase)
The practical help for aligning, fixation, and welding of flange connections with pipe form parts.
Complete in suitcase for the nominal widths of DN 25/40/50/65/80/100 each with three tray sets and handle pieces for DN 25, 40, 50/65, and 80/100.
-
Per diameter, there are three tray sets for flange/pipe or flange/arch connection
-
Components are aligned simultaneously and fixed.
-
Exact tacking and welding device with or without gap; depending entirely on the work material, welding without tacking may also be performed.
-
No discolouration on account of exact and uniform inside shaping
-
Using constructive measures, clamping first a tray set, for easy handling.
-
Available with ISO or DIN trays (please specify when ordering)
-
The device may be extended (to be specifically agreed)
|
|
